HOW TO DETERMINE THE RIGHT LAMPSHADE SIZE
Are you looking for help choosing a lampshade? Below are some guides that will help you answer the questions. How do you measure a lampshade?
1. Measure across the top of the lampshade
2. Measure across the BOTTOM portion of the lampshade
3. Measure from the SLANT (side of the lamp shade) to the measurement.
These dimensions will be listed on most lamp shades as Top x Bottom and Slant. You can also measure the height from top to bottom. These can be used in conjunction with the "rules" below.
GUIDELINES FOR LAMPSHADE SELECTION
1. The lamp's body will have a more simple shape, which allows for more shades.
2. You can repeat the lamp body shape in the shade shape. For example, a square lamp with a square base may take a shade that has a square top and bottom.
3. The shade's bottom should not be wider than the lamp body (to its bottom).
4. Match the colors of the lampshade to the trim color of your room and tones in the lamp's body. Use black and color as accents.
5. Be aware of your wattage requirements! Maximum wattage is determined by the lampshade, not the lamp body.
6. When choosing a shade, think about the style of your lamp. A plainer shade is better for busy lamps.
8. Think outside the box to achieve DRAMA! Buy a brad A cone shade can be placed on a small round base. Instead you can buy your very own moonlight lamp from moonlampshop.co.uk You could also use a gloss white shade on a vase made of beige stone, a shade that is shaped like a cube on a stacked lamp, or a shade that is red or black on an Oriental base.
HOW DO YOU DETERMINE SHADE HIGHT?
A table lamp shade should measure approximately 60 to 70% of the height of its base. Floor lamp shades should be about the same height as the base, minus 30% to 40%. The shade's height should be measured at an angle.
What is the DIAMETER?
The table shade's diameter (width) should not exceed the height of its base (to the bottom) and should not exceed 2 inches. If using a compact fluorescent bulb, floor lamp shades must be at least 3.5 inches wider than the bulb's widest point. The lamp shade's diameter is often expressed as its size (16" shade has a dimension of 16").
ARE CERTAIN SHADES BETTER FOR CERTAIN BASIS STYLES? Do you have any pointers for matching the two?
* The lamp's body should be simple to allow for more shades.
* Keep the same shape in the shade as the lamp body. For example, a square lamp with a square base may use a shade that has a square top and bottom.
Is there any "NO-NO" when it comes to choosing a shade?
* There is a skilled designer who can break every rule (see rules). Your best guide is your eye.
* ALWAYS consider your lumens
Is it safe to go bigger or smaller if you're comparing two similar shades?
It's best to get more power than you need, just like with outdoor wall lights.
ISN'T IT ASHAPE OF SHADE THAT FLATTERS THE MOST BASES
A shade should be shaped to fit the overall contours of your lamp. Round lamps work best with square shades, while round lamps are best with rectangular shades. A shapely lamp can be given a slender shade. Another option is to replicate the shape of the vase stand in the shade. You could try a square shade for a round ginger container with a square base.
ARE THERE ANY SHADE SHAPES THAT ARE PARTICULARLY HARD TO GET RIGHT?
The shade may be as small as possible depending on how slim the lamp's body is. It can be difficult to find the right shade for very-flared lamps. You will often need to adjust the size of your lamp's harp when changing the lampshade. You will need a shorter harp if your shade is more flared. You may need guidance from a salesperson if you have more than one socket.
SHOULD THE SHADE PRESS THE TOP OF LAMP'S BASE? SHOULD THE SHADE KISS THE TOP OF THE LAMP'S BASE?
So that there are no mechanical parts visible, the bottom of the lampshade must touch the lamp's body. The shade's bottom should be at eye level. Many harps can be interchanged so you might need to buy a new shade. You can find harps in both regular and heavy sizes.
Comentarios